GSM Telemarketing Device Advertising Terminal with Auto Dial ETS 1688

GSM Telemarketing Device Advertising Terminal with Auto Dial ETS 1688

This equipment is a machine with 2 GSM modules, a telephone interface, can automatic to call out number, play IVR automatically, and call in. After the call is connected according to the process can be automatic response, users can freely set, can effectively help to improve the efficiency of voice  advertising and marketing sale .  

Products Detail

Specification of this GSM Telemarketing Device Advertising Terminal with Auto Dial ETS 1688
 
This equipment is a machine with 2 GSM modules, a telephone interface, can automatic to call out number, play IVR automatically, and call in. After the call is connected according to the process can be automatic response, users can freely set, can effectively help to improve the efficiency of voice  advertising and marketing sale .
 
Main Feature
1.Call in & Call out control route .
2. 2 GSM chip will call by turns, support remote control.
3.Use Micro SD card to save record file, supports mp3, wav format , max storage is 32G Micro SD card.
4.Dot matrix  LCD monitor.
5.1 button used for Start / Pause the calling task or check the task status
6.1 RJ11 phone jack, used to connect with desktop phone, used for local control or normal calling. 
7.2 USB Jack, one used to transfer record file as a U Disk, the other is used to connect with the control software in PC.
8.DC 12V external power supply, or 5V Power Bank.
9.Can store up to 10000 calling task's phone number and record of 1000 calling in number.
 
Control function of Button
 The device have a control button,long press 3 seconds to start/pause calling task,short press 1 second to show the status of calling task:the total number of calls and the number of completed calls.
 
MMC Memory card description
The maximum capacity of memory card can be 4G,when PC connect above USB interface,there will be a moving disk,the sound file can be copied into the moving disk,the file can be mp3 or wave file formats,the name should be 1-100 number,when the corresponding IVR are configured with a file,the corresponding sound recording will be played.
The memory card can also be taken out and loaded onto the card reader to operate.
 
Parameters of this GSM Telemarketing Device Advertising Terminal with Auto Dial ETS 1688
 
Computer software setting
 
1.When the computer connect below USB interface,there will be a USB device,after the driver is installed,it appear a COM port,the WIN10 operating system comes with the driver.
 
2.Open the computer software,choose COM port and click “online” button,then you can see the working status of the device on the status screen.
 
The status of device:
This page include as below:
*GSM module:current working status,signal,incoming/outgoing call numbers,IMEI,IMSI,Call statistics information.
*Call task:call task status,task statistics,number recording(include call number,outgoing call time,talk time,press key recording,call result).There are also stop,start,delete,new,export button.
*Incoming recording:include call number,incoming time,talk time,press key recording,processing result.There are also delete,export button.
 
Configuration
 
This page can be set GSM Volume,microphone sensitivity,automatic call enable,automatic call dialing interval,hold time,maximum talk time,task start time,task time control,administrator phone number,call completion whether send massages to the administrator,the content of the messages.
 
Outgoing IVR Configuration
 
The process of outgoing IVR total have 13,1 root process,10 IVR process,1 turn to landline process,1 turn to mobile phone process.First go to root process when the telephone is connected,so the root process does not allow closed,other process can choose to open or close,every process has a message content,a voice recording file serial number setting,10 sets events,event parameter,action,action parameter.Specific meaning is:
Event:can select button and overtime
Event parameter:when the event is button,the input parameter is any one of 0-9,* #,when event is overtime,the input parameter is 1-10000,indicating that corresponding overtime in seconds.
Action:can select skipping to the next process,send SMS,hang up
Action parameter:when the action skip to the next process,this parameter is effective,corresponding parameter will be serial number of next process.When action is used to send SMS,SMS content can be set in the “SMS content”input box of current page,
When the action is used to hang up,no action parameter are needed.
 
Incoming IVR Configuration
 
It is basically the same as the Outgoing IVR configuration
 
Software upgrade
 
Select a new device software,click the upgrade button,the device will be upgrade automatically
 
 
Pictures of this GSM Telemarketing Device Advertising Terminal with Auto Dial ETS 1688
 

 

Looking forward to your inquiry for this GSM Telemarketing Device Advertising Terminal with Auto Dial ETS 1688

Tags

Leave your messages:

Send Inquiry Now

Related Products

Send Inquiry Now